<?xml version="1.0" encoding="utf-8" ?>
<?xml-stylesheet type="text/xsl" href="rss.xsl" media="screen"?>
<rss version="2.0">
  <channel>
    <title>亿特软件</title>
    <link>http://bbs.yitsoftware.com/</link>
    <description>Latest 20 threads</description>
    <copyright>Copyright (c) 亿特软件</copyright>
    <generator>Discuz!NT</generator>
    <pubDate>Sat, 19 May 2012 22:51:12 GMT</pubDate>
    <ttl>60</ttl>
    <item>
      <title>请求帮助解决问题</title>
    <description><![CDATA[安装完后，能够共享上网，但每次重启机器，不能自动上网，需打开控制台重新设置一下，是怎么回事？]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1464.aspx</link>
      <category>X-Router讨论区</category>
      <author>llbbj</author>
      <pubDate>Sat, 19 May 2012 08:49:28 GMT</pubDate>
    </item>
    <item>
      <title>X-Router v5.0免费版是不是有时间限制的啊？</title>
    <description><![CDATA[半个月前发了一张帖，是关于DHCP用了几天这后就不能自动分配IP了，后面换了更新版的5.0，现在用了半个月了，到了前天晚上又上不了网了，关机开机试了多次还是不行，后来进入控制台看，显示已经拨了号，但是就是上不了网，网页和QQ都打不开的，试着把MODEM直接连电脑，拨号可以正常上网，再试X-Router，还是显示拨了号，却上不了网，折腾了一个晚上，还是不行。打算第二天再试下，没想到第二天又可以上网了]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1457.aspx</link>
      <category>X-Router讨论区</category>
      <author>火车头</author>
      <pubDate>Sat, 05 May 2012 18:24:47 GMT</pubDate>
    </item>
    <item>
      <title>XROUTER做WEB服务器，访问问题。</title>
    <description><![CDATA[主机用XP，装XROUTER 5.0，ADSL，局域网连3台机器，使用XROUTER自带的pppoe拨号，上网良好。

最近装APACHE在主机上做了web服务器，在局域网登录访问一切没问题，然后打算用花生壳做动态域名访问，发现在外网连不上80端口。

360查看，80端口在监听，内网访问OK，自带防火墙没开，外网能用XROUTER登录台，连接是OK的，请问要在软件哪里设置呢？

要用]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1454.aspx</link>
      <category>X-Router讨论区</category>
      <author>gtzaw</author>
      <pubDate>Fri, 04 May 2012 22:33:17 GMT</pubDate>
    </item>
    <item>
      <title>5.1新版在百度等只能搜索三个关键字以内，三个字以上就无法搜索</title>
    <description><![CDATA[如题]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1453.aspx</link>
      <category>X-Router讨论区</category>
      <author>hbhwdm</author>
      <pubDate>Fri, 04 May 2012 15:39:09 GMT</pubDate>
    </item>
    <item>
      <title>强烈建议增加多Lan接口</title>
    <description><![CDATA[最少支持两Lan
这样可以用两块网卡接两个网段,且可选择互相访问
整个网络只要最普通的交换机和网线就行了
]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1450.aspx</link>
      <category>X-Router反馈区</category>
      <author>mrchl</author>
      <pubDate>Sat, 28 Apr 2012 11:42:24 GMT</pubDate>
    </item>
    <item>
      <title>发布X-Router 5.1</title>
    <description><![CDATA[

  1.修正：启用智能流控后，迅雷等下载不能使用多线，被绑定到了一条线路上。
  2.改进：WIN7客户机PPPOE拨号后，不会长时间提示在网络上注册计算机。
  3.修正：安装在WIN7系统下会蓝屏。
  4.修正：使用WEB管理添加账号名称中含大写，导致客户机无法认证。
  5.修正：在策略路由中如果同时使用光纤与ADSL出口，会导致ADSL出口流量很小，甚至没有。
  6.]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1445.aspx</link>
      <category>X-Router下载区</category>
      <author>admin</author>
      <pubDate>Wed, 25 Apr 2012 15:49:15 GMT</pubDate>
    </item>
    <item>
      <title>用VPN方式连接上外网，不能打开百度、google的搜索页</title>
    <description><![CDATA[用VPN方式连接上外网，不能打开百度、google的搜索页，就是客户机用VPN连接到X-ROUTE上网的方式]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1444.aspx</link>
      <category>X-Router讨论区</category>
      <author>BrightTime</author>
      <pubDate>Wed, 25 Apr 2012 10:39:47 GMT</pubDate>
    </item>
    <item>
      <title>请问如何通过XR来访问内网</title>
    <description><![CDATA[如电脑A、电脑B 通过XR上网，在同一网段192.168.1.X。但电脑A和电脑B在相互隔离的交换机端口，A不能直接访问B，B也直接不能访问A，但XR可以访问A和B。
请问如何设置使A通过XR来访问B（如B架设了网站），好像有一个设置  ，]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1441.aspx</link>
      <category>X-Router讨论区</category>
      <author>skywrr</author>
      <pubDate>Sun, 22 Apr 2012 23:03:27 GMT</pubDate>
    </item>
    <item>
      <title>路由兼容问题，第一次遇到，请高手解决！</title>
    <description><![CDATA[本人刚刚开始接触的路由是ros，然后海蜘蛛，最后用的xr，自从用了xr，就感觉xr非常好，升级快，稳定，主要路由机器还可以bt和干别的，我喜欢，用了1年多了，非常好，当然我是免费版，嘿嘿，不过最近遇到问题，不知道......]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1440.aspx</link>
      <category>X-Router讨论区</category>
      <author>u7758</author>
      <pubDate>Sun, 22 Apr 2012 20:42:36 GMT</pubDate>
    </item>
    <item>
      <title>有一个网站的域名无法解析</title>
    <description><![CDATA[我用的是5.0免费版，现在出现一个问题，内网的机子上其它网站都正常，上电信数字校园网站（地址：369.269.net)时提示域名无法解析，用直连外网的机子上这个网又能正常上去。请问是怎么回事？]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1439.aspx</link>
      <category>X-Router反馈区</category>
      <author>wangliuxiang</author>
      <pubDate>Thu, 19 Apr 2012 17:54:06 GMT</pubDate>
    </item>
    <item>
      <title>5.0版本的DHCP服务和打开163网站的问题</title>
    <description><![CDATA[我用一台只装有X-Router v5.0免费版的专用服务器，刚开始用了两天，DHCP可以分配IP地址，两天后客户机自动分配不了IP地址，需要手动设置IP地址才能上网，还有就是163网站的问题，看首页的新闻的时候看不到，打开链接会一闪就跳到一个X-Router的广告画面，请教下这是什么原因呢，服务器装有还原，重启了还是不行。]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1438.aspx</link>
      <category>X-Router反馈区</category>
      <author>火车头</author>
      <pubDate>Thu, 19 Apr 2012 13:11:04 GMT</pubDate>
    </item>
    <item>
      <title>WEB管理</title>
    <description><![CDATA[help me：可以上网，可以ping 192.168.1.1，客户机就是无法进HTTP://192.168.1.1:827；之前4.5版本可以进，重装5.0版本就出现了这个问题.]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1435.aspx</link>
      <category>X-Router讨论区</category>
      <author>chb_1632008</author>
      <pubDate>Wed, 18 Apr 2012 14:26:12 GMT</pubDate>
    </item>
    <item>
      <title>安装4.2版本很稳定，其他的版本马上蓝屏死机</title>
    <description><![CDATA[安装4.2版本很稳定，其他的版本如4.86 5.0 这些马上蓝屏死机，貌似驱动的问题，有什么办法避免吗？]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1434.aspx</link>
      <category>X-Router讨论区</category>
      <author>yy2008top</author>
      <pubDate>Tue, 17 Apr 2012 01:06:43 GMT</pubDate>
    </item>
    <item>
      <title>支持无线网卡，支持无线接入点功能。</title>
    <description><![CDATA[支持无线网卡（PCI、USB），支持无线接入点功能（加一块无线网卡即变成一台功能强大的无线路由器）。
那该多好呀。]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1433.aspx</link>
      <category>X-Router反馈区</category>
      <author>xyz2003</author>
      <pubDate>Mon, 16 Apr 2012 14:11:26 GMT</pubDate>
    </item>
    <item>
      <title>单机 多帐号带宽叠加，为什么不能自动拨号。。</title>
    <description><![CDATA[我用的铁通GPON宽带，用5个4M帐号叠加带宽，X-router4.86版
为什么每次都要手动拨号，
所有出口 勾选 由系统自动连接或断开 ，机器数0，全部不能自动拨号，手动也拨不上。。。
不选此选项，不能自动拨号，但可以手动拨号。

请问单台机器不能 自动拨号吗？



发错版块了，麻烦管理员移动一下，，，:-|
系统规定发帖间隔为1800秒, 您还需要等待 1532 秒]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1427.aspx</link>
      <category>X-Router图片区</category>
      <author>暗元素</author>
      <pubDate>Tue, 10 Apr 2012 18:48:42 GMT</pubDate>
    </item>
    <item>
      <title>武汉IT新时空平面设计培训 静态广告/动态广告设计培训</title>
    <description><![CDATA[关键词：武汉IT新时空   武汉平面设计培训   平面设计师培训   武昌平面设计培训   武昌平面设计师培训  武汉Photoshop培训 武汉CorelDraw培训 武汉设计培训学校 

平面设计专业介绍：                                                                     
“平面设计”专业是指以&amp;quot;视觉&amp;qu]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1426.aspx</link>
      <category>X-Router图片区</category>
      <author>itxskspk99</author>
      <pubDate>Tue, 10 Apr 2012 17:05:40 GMT</pubDate>
    </item>
    <item>
      <title>关于路由的策略</title>
    <description><![CDATA[这个路由是不错。就是策略那一方面不到位。没有优先选择和TCP/UDP很不方便。还有就是我有一个问题。
就是我有4条线。一条光纤3条AD。WAN1是光纤其它2，3，4 AD。
（1）我把1863端口QQ音乐的和酷狗40000的源端口设置走AD 4线路 （2）然后192.168.0.31-192.168.0.50的IP设置走2，3线路 80目的端口。（3）最后一条是192.168.0.1-192.]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1425.aspx</link>
      <category>X-Router讨论区</category>
      <author>a5080583</author>
      <pubDate>Mon, 09 Apr 2012 18:51:02 GMT</pubDate>
    </item>
    <item>
      <title>外网无法访问服务器</title>
    <description><![CDATA[请问5.0新版是不是加了防火墙了?
现在内网可以访问,但外网不可以访问服务器了
以前可以


对了
还有个变化
以前是单出口,现在加了一个网络出口]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1424.aspx</link>
      <category>X-Router下载区</category>
      <author>mrchl</author>
      <pubDate>Mon, 09 Apr 2012 12:05:09 GMT</pubDate>
    </item>
    <item>
      <title>拉丝牌</title>
    <description><![CDATA[拉丝牌，不管是打金花、斗牛、斗地主、三公等，想要什么牌都是可以拉出来好牌。现场不管多少人也看不出破绽，好用，管用，实用，欢迎订购。电话：0755-27752363 传真：0755-27753975]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1423.aspx</link>
      <category>X-Router下载区</category>
      <author>loveedn99</author>
      <pubDate>Sun, 08 Apr 2012 15:53:58 GMT</pubDate>
    </item>
    <item>
      <title>4.8.6免费版的一些问题，会自动重启</title>
    <description><![CDATA[直接在路由器上面运行控制台。电脑５０%的机率会蓝屏重启 配置 c3-1.1/815ep/256m/ide-10g 不知道是不是我的配置太低了。在其它机器上面运行不会。
另外端口映射有点问题 比如我要映射两个端口5600 ,5610 如果在路由器上面这样内外网填5600-5610 映射不成功，内外网分别添加5600-5600 和5610-5610,这样成功。

打开一些特定网站会出现以下的情况]]></description>
      <link>http://bbs.yitsoftware.com/showtopic-1422.aspx</link>
      <category>X-Router反馈区</category>
      <author>zgaox</author>
      <pubDate>Wed, 04 Apr 2012 16:34:42 GMT</pubDate>
    </item>
  </channel>
</rss>
